What’s The Cisco dpc3000 Cable Modem?
The Cisco dpc3000 is a high-speed cable modem that offers four times the speed of a traditional cable modem within an average-sized footprint. This modem features low power consumption of less than six watts and is designed by Cisco to have capability for high levels of management.
Like many Cisco high-speed modems, the Cisco dpc3000 features Webstar technology, which allows trouble-free downloading and sharing of data without waiting for buffers to catch up. The modem features illumination for power, downstream, upstream, online, and link. The link indicator illuminates when there is no ethernet or USB device present and blinks when data is being transferred.
The Cisco dpc3000 modem also features easy to identify ports and settings. A reboot switch is included for factory reset along with included cables for quick setup. It also features a wall mount setup with included screws to keep desk space clear as well as keep the modem within easy view for troubleshooting.
The Cisco modem also has low system requirements which uses very few resources. The device requires a PC with a processor of 133 MHz or higher and 32MB of RAM. It can also run a Macintosh as far back as OS system 7.5 with 32MB of ram.
Here’s What It’ll Do For You
The Cisco dpc3000 cable modem will provide you with intelligent high-speed data transfer. It differentiates itself from high-speed data transfer into intelligent transfer by its lack of constant buffering and the use of multiple streaming channels of data packets.
This cable modem also provides multiple paths for home networking. If you have a home server or a home media server, this cable modem will provide the level of streaming security needed for up to 64 users on one device. This means that this modem can even function at an enterprise level for a small to medium-sized business within an office.
This modem is also capability of handling multiple RF-enable devices as well. If you are setting up a connection for a VCR, older equipment, or a digital home communications terminal (DHCT), you can use a cable splitter connected to the modem to receive full strength signal. This means you can combine resources for your cable television set-top box unit.
- Fast DOCSIS 3.0 speeds
The Cisco dpc3000 is enabled with DOCSIS 3.0, which is a technology that utilizes high-speed data transfer by existed fiber-coaxial in cable. The 3.0 variety allows for a downstream of up to 160 MBPS and a downstream of 120 MBPS.
Each stream is a “bonded” channel, which means that by combining multiple downstream and upstream channels, you have access to the highest available speeds on the network layer for your cable provider.
The latest DOCSIS technology also allows for the network layer to add management over IPv6, which means that security is less of an issue when accessing data. By extruding networking layers into independent channels, the buffering is less likely to occur as is the chance of data degradation.
An auto-sensing 10/100BaseT MDIX ethernet port also allows for devices to be instantly recognized with not only device settings but the location of the device in terms of IP address.
- Home networking enabled
The Cisco dpc3000 cable modem is fully equipped for all home and business networking needs. There is a bridged Gigabit ethernet and 10/100BaseT ethernet port. The bridged ethernet port allows the user to have their own IP address if design a VPN (virtual private network).
The bridge can act as a ‘switch’ to connect multiple ethernet interfaces into the device. All of this can be accessed by logging into the cable modem within a web browser for advanced settings.
The Cisco dpc3000 cable modem also features maximum support on attaching multiple devices with a user base of up to 64 users. This allows you to use high-speed networking with multiple IP addresses as well as share content without having to copy from a disk or CD.
This enables true networking when security is an issue. The latest IPV6 settings are enabled in the modem to allow advanced security beyond WPA.
- Easy installation
Not only is the installation simple, but the packaging for the Cisco dpc3000 cable modem is also designed for user-friendliness. The WebWizard GUI allows for simple setup of router settings via a web browser.
It’s simple enough to allow further access into advanced troubleshooting after installation as well. Automatic software upgrades also ensure that the latest firmware is attached to the device for security compliance.
The WebWizard allows for easy installation by removing the need for a CD. You will need the CD for USB driver installation, but the configuration process occurs within a built-in process in the cable modem.
Here’s What I Want You To Do Next
If you are looking for a solution that allows high-speed networking for home or business, consider the Cisco dpc3000 cable modem. It’s use of intelligent networking settings and the latest DOCSIS updates make full use of the cable fiber enabling internet and data access.
If you are looking to hook up additional components to a cable modem, this device may provide the connection needed. With capabilities for multiple users gaining access to higher streams of data, this powerhouse will provide you with all the energy needed to set up your home network.
If you are looking to consolidate devices, consider this Cisco cable modem as the device to handle those needs as well. Consolidation is important when considering saving space, but it is also important in both data integrity and security. By combining resources, there is less of a chance of devices leaking data into dynamic addresses.
Finally, consider the resources in your home and office and how they might benefit from fast data speeds as well as full compliance to IPv6. You may be surprised at the positive changes in networking that improves home or office efficiency in data.